Products Description
Replaces OEM part #: 190059
A BlueFusion 2 in. pressure gauge, 0-60 psi, with a 1/4 in. NPT back (rear) connection. It replaces Pentair 190059 on filters and valves that use a back-mount gauge.
Key features
- Know when to clean: a rise in pressure shows the filter is getting dirty
- Back mount: the 1/4 in. NPT stem is on the back of the gauge, not the bottom
- Easy-read dial: 2 in. face, 0-60 psi range
- Quick swap: unscrew the old gauge and thread in the new one
Compatibility
| Brand | Equipment | Models |
|---|---|---|
| Pentair / Sta-Rite | Filters and valves with a back-mount gauge port | 1/4 in. NPT back-mount ports |
Check where the stem is on your old gauge. If it comes out of the bottom edge, you need a bottom-mount gauge instead.
Replaces part numbers
FAQs
How do I install it?
Turn off the pump and open the air relief to release pressure. Unscrew the old gauge, wrap the new thread with Teflon tape and hand-tighten plus a quarter turn.
When should I clean my filter?
Write down the pressure right after cleaning. Clean the filter when the pressure climbs well above that reading; your filter manual gives the exact number.
BlueFusion is an aftermarket brand. This part is not made, sold or endorsed by Pentair or Sta-Rite. Brand names and part numbers are for compatibility reference only.
Trusted By Pool Owners Nationwide




